ISO9001-2000
Communication Accessories

Registered Firm

 
 
Accessories
   M285S
                                    
144 to 174MHz / Gain: 3.4dB / Max. power rating: 200W / Impedance: 50ohms / VSWR: Less than 1.5 : 1 Length: 1.33m / Weight : 180g / Connector: MP / Type: 5/8? mobile whip
 
MC-100
 
134 to 174MHz / Gain: 2.15dB / Max. power rating: 70W / Impedance: 50ohms / VSWR: Less than 1.5 : 1
Length: 0.52m / Weight : 390g / Connector: MP / Type: 1/4? mobile whip/magnet mount antenna
 
CP-22E
 
144 to 174MHz / Gain: 6.5dB / Max. power rating: 200W / Impedance: 50ohms / VSWR: Less than 1.5 : 1
Length: 2.7m / Weight : 1.1kg / Rated wind velocity: 45m/sec. / Mast diameter accepted: 30-62f
Connector: MJ / Type: omnidirectional 2×5/8?
 
F22
 
144 to 174MHz / Gain: 6.7dB / Max. power rating: 200W / Impedance: 50ohms / VSWR: Less than 1.5 : 1
Length: 3.2m / Weight : 1.3kg / Rated wind velocity: 50m/sec. / Mast diameter accepted: 30-62f
Connector: MJ / Type: omnidirectional 2×7/8?,FRP outershell
 
BC-100
 
134 to 174MHz / Gain: 4.5dB / Max. power rating: 200W / Impedance: 50ohms / VSWR: Less than 1.5 : 1
Length: 1.7m / Weight : 0.9kg / Rated wind velocity: 60m/sec. / Mast diameter accepted: 30-62f
Connector: MJ / Type: omnidirectional 5/8?,FRP outershell
 
DL30A Compact Dummy Load

Specifications:

 

Frequency:

DC-500 MHz

Rated Power:

15 watts continuous, 100 watts peak

Connector:

PL-259

Impedance:

50ohms

VSWR:

1.15

Dimensions:

30mm Diameter x 75mm Length

 
CA35RPW Lightning Arrester

Specifications:

 

Frequency:

DC – 1000 MHz

SWR:

less than 1:1

Impedance:

50ohm

Insertion Loss:

less than 0.2 dB

Max Power Rating:

400w PEP

Connector:

UHF female - UHF male

Impulse Wave Discharge Voltage:

1000v

Impulse Wave Discharge Capacity:

6000A

Impulse Wave Retention Discharge Capacity:

DC350v ± 20%

Insulating Resistance DC100v:

Over 10,000M ohms


Remarks: Waterproof.

 
SX Series Power Meters
 

SX-100
1. 1/2 Second Electronic Voice Delay
2. 90 Memory Speed Dialer
3. Redial
4. Five Mic Press Speed-Dial
5. Toll Restrict
6. Regenerated DTMF or Pulse Dial out
7. Remote Base Mode
8. Land to Mobile Selective Calling

 
 
SX-200
Frequency Range:        1.8 - 200Mhz
Insertion Loss:                Less than 0.15dB,
                                           Les than 0.2dB,
                                           (1.8 - 3.5 Mhz and 150 - 200Mhz)
Measurment Function:   Forward RF Power, Reflected RF Power, SWR, PEP Monitor
 
 
SX-400
Frequency Range:        140 - 525Mhz
Insertion Loss:                Less than 0.1dB (140 - 250MHz)
                                           Less than 0.2dB (400 - 470MHz)
                                           Less than 0.3dB (525MHz)
Measurment Function:   Forward RF Power, Reflected RF Power, SWR, PEP Monitor
 
 
SX-1000
Frequency Range:        1.8 - 160Mhz(S1)
                                          430 - 1300Mhz(S2)
Insertion Loss:                Less than 0.2dB (S1)
                                           Less than 0.15dB (S2)                                            
Measurment Function:   Forward RF Power, Reflected RF Power, SWR, PEP Monitor
 
 

CS-800 - Duplex Phone Patch and Repeater Controller

The CS-800 contains everything necessary to convert your duplex base station, repeater, or dual band transceiver into a powerful Full Duplex (or Semi-Duplex) Mobile Radio Telephone system. A built-in repeater maker will turn your system into a repeater if desired. This will greatly extend the communications range of mobile and portable radios on the system.

 
 

CSI MODEL CS-900 - Simplex Phone Patch

The Connect Systems Model CS-900 is a Deluxe Microprocessor based fully automatic VOX (Voice Activated) Simplex Base Station Interconnect. The CS-900 can be operated simplex or through any conventional repeater and many trunked repeaters. Words and syllables are never lost because the built in 1/2 second Electronic Voice Delay (EVD) circuit keys the transmitter 1.2 second before the telephone audio is transmitted. The delay assures that the base transmitter to mobile receiver path is ready before voice is sent. EVD is either unavailable or an expensive add on option in competing interconnects.